This product is no longer promoted on Made-in-China.com. If you find any infringement or sensitive information of it, please contact us for handling. Thank you.
  • Disposable Face Mask Production Line with Nonwoven Fabric
  • Disposable Face Mask Production Line with Nonwoven Fabric
  • Disposable Face Mask Production Line with Nonwoven Fabric
  • Disposable Face Mask Production Line with Nonwoven Fabric
  • Disposable Face Mask Production Line with Nonwoven Fabric
  • Disposable Face Mask Production Line with Nonwoven Fabric

Disposable Face Mask Production Line with Nonwoven Fabric

Contact Supplier

Diamond Member Since 2013

Suppliers with verified business licenses

Trading Company

Basic Info.

Specification
3500mm (L) x 1100mm (W) x 2100mm (H)
Trademark
NW
Origin
Jiangsu
HS Code
8447909000
Production Capacity
100 Sets Per Month

Product Description

plane mask slicer
  1. Introduction of plane mask slicer
    Plane mask slicing machine is mainly used for the automatic formation of flat masks. After the entire roll of fabric is unrolled, it is driven by rollers. The fabric is unwound through automatic hemming, hemming, and the nose bridge strips are rolled. Only need one person to operate this machine. The scientific and reasonable mechanical transmission configuration makes this machine extremely efficient. Each machine can produce 150 ~ 180 tablets per minute.
     
  2. Plane mask slicer configuration

    Equipment size: 3500mm (L) x 1100mm (W) x 2100mm (H);

    Equipment weight: 1600 KG

    Working voltage: AC220V, 50 / 60HZ, rated power: 4KW

    Operating environment: temperature 10-35
    ºC, humidity 5-35% HR, no flammable, corrosive gas, no dust (cleanliness no less than 100,000 grade).

    3.Plane mask machine equipment characteristics

    The machine adopts aluminum alloy structure, which is beautiful and solid without rusting;

    Configure high power, can be equipped with ultrasonic welding system;

    With photoelectric detection and automatic counting;

    High stability, low failure rate and excellent performance;

    Multi-purpose machine, adult and child masks can be adjusted arbitrarily;



    It can produce 150 ~ 180 tablets per minute.
  3. Disposable Face Mask Production Line with Nonwoven Fabric
     
  4. Manual type ultrasonic ear band welding machine
  5. Overview:
    The manual ultrasonic mask welding machine uses the principle of ultrasonic mechanical energy and thermal energy conversion to transmit ultrasound to the cloth, so that the cloth contact point quickly generates high temperature to melt its contact material. Two pieces of cloth will generate a small spot to be bonded, so as to achieve bonding. The ultrasonic mask welding machine is also called the ultrasonic lace machine, which can be processed to produce the required products, such as knitted fabrics, non-woven fabrics, T / R fabrics, Teflon fabrics (Polyester fabrics), Leather, nylon cloth, chemical fiber cloth, gold cloth, multilayer cloth, etc.
    Working principle
    Transform 220V, 60HZ power into 15KHZ (or 20KHZ) high-voltage electric energy, and use the vibrator to convert it into mechanical energy. The mechanical vibration is transmitted to the workpiece via the transmission head and the welding head, and the air pressure is used to produce the friction effect of the working interface. The vibrator and the transmission device are installed inside the vibrating cylinder, and the welding head is connected outside. The air pressure system and the control circuit are used to lift and lower under the set conditions to complete the operation procedure.

    The overall structure
    1. Frame: working table and welding connection structure.
    2. Mold: It is divided into upper mold and lower mold, which are made according to the welding requirements of the customer's workpiece.
    3. Transducer: As one of the important components of the equipment, it converts 220V, 50HZ power into 20KHZ high voltage power.
    4. Solenoid valve: send out corresponding signals to control the flow of air flow of each starting mechanism through manual operation, to realize the motion control of the cylinder, and complete the entire product processing process.
    5.Time relay: can adjust delay time, curing time and welding time.

    6. Counter: used for work piece counting.
    7. Limiting structure: The limiting screw of the cylinder can finely adjust the lowering height of the upper mold.

    Technical parameter
     
    Itemparameter
    Power supply220V, 50/60HZ
    frequency15KHZ
    Delay time0.01S-9.99S
    Curing time0.01S-9.99S
    Bonding time0.01S-9.99S
    Control methodmanual
    Compressed air0.8Mpa
    DimensionLXWXH=600mmX400mmX1200mm
    Net weight60kg
     
    Disposable Face Mask Production Line with Nonwoven Fabric

     

Send your message to this supplier

*From:
*To:
avatar Mr. Alex Ye
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now

People who viewed this also viewed

US $269 / Piece
US $680 / Piece
US $350 / Piece
US $150-157 / Piece
US $225 / Piece