60tph Triple Drum Rotary Drying System for Sand, Slag, Limestone

• Customization: Available
• Movement Way: Combined
• Heating Mode: Transmission
• Drying Medium: Air
• Operation Pressure: Atmospheric Pressure
• Drum Number: Multiple
• Type: Top-Feed Type
• Application: Dry Sand, Slag, Limestone
• Capacity: 60tph
• Fuel: Gas, Oil, Coal
• Powder: 210kw
• Moisture Before Drying: 15%
• Moisture After Drying: <0.5%
• Output Temperature: 50-65°c
• Structure: Rotary Type Drier
• Operational Method: Continuous
• Type of Flow: Cross Flow
• Transport Package: Seaworthy Packing
• Specification: 60tph
• Trademark: Newwall
• Origin: Jiangsu
• HS Code: 8419399090
• Production Capacity: 50 Sets/Year

Product Description

Triple drum sand dryer

                        
The three drum sand dryer can be applied in drying raw materials such as yellow sand, slag, clay, quartz sand etc...It's widely used in industries such as dry mortar, cement, building materials, glass, chemicals, and casting etc.
the heat efficiency of three drum sand dryer can be up to 80%. shorter length, it's easy to arrange the work site. gas burner is clean and save space.   









General description:
 The dryer is assembled by three concentric-cylinders which halved joint with different diameters. Computer optimized stock 
guide and lifting blade with different angles and spacing are installed inside the 
cylinder, the structure can ensure that the material being dried runs along the
 direction of screw under the impact of gravitation, stay sufficient time and good 
dispersion in the cylinder to let the material exchange with the heat airflow from
 air heating furnace inside of the cylinder. The special triple drum structure 
makes the inner cylinder and middle cylinder being surrounded by the outer 
cylinder to form a self-contained thermal insulation system, the radiated heat 
from surface of inner and middle cylinder assist heat the material in the outer
 cylinder, but the outer cylinder is at the low temperature end, so the heat 
dissipation area and heat loss is reduced significantly.


Advantage:
1.Energy saving, the heat efficiency can be up to 80%,
2. Save space, just the 1/3 of single cylinder dryer.
3. Friction transmission, lower noise
4. Low dust pollution
5. The cylinder and flying plate use alloy steel, double service life than normal steel.
6. Can use coal, gas or oil as fuel.